News News
News 新闻详情

What are the types of led reflective films?

Date: 2017-05-24
Browse the number: 8

Reflective film can be divided into two categories, one is the metal reflective film, one is the all-dielectric reflective film. In addition, there is a combination of the two metal dielectric reflective fil.

 

General metal has a large extinction coefficient, when the light from the air into the metal surface, into the metal within the light amplitude of the rapid decay, making the metal into the internal light corresponding reduction, while the reflected light can increase. The greater the extinction coefficient, the more the attenuation of the light amplitude, the less the amount of light entering the metal, the higher the reflectivity. People always choose a larger optical coefficient, the optical properties of those more stable metal as a metal film material. In the UV area commonly used metal thin material is aluminum, commonly used in the visible area of aluminum and silver, in the infrared area commonly used gold, silver, and copper, in addition, chromium and platinum are also often some special film. As the aluminum, silver, copper and other materials in the air is easy to oxidize and reduce performance, it must be used to protect the dielectric film. Commonly used protective film materials are silicon oxide, magnesium fluoride, silicon dioxide, aluminum oxide and so on.

 

The advantage of the metal reflective film is that the preparation process is simple and the wavelength range of the work is wide. The disadvantage is that the optical loss is large and the reflectivity can not be high. In order to further improve the reflectivity of the metal reflective film, it is possible to coat the outer side of the film with a predetermined thickness of the dielectric layer to form a metal dielectric reflective film. It should be noted that the metal dielectric film increases the reflectivity of a certain wavelength (or a certain wave), but destroys the characteristics of the metal film neutral reflection.


The all-dielectric reflective film is based on multi-beam interference. In contrast to the antireflection coating, it is possible to increase the reflectance of the optical surface by plating a thin film having a refractive index higher than that of the base material on the optical surface. The simplest multilayer reflection is made by alternately depositing two materials of high and low refractive indices, the optical thickness of each layer being a quarter of a certain wavelength. Under these conditions, the reflected light vectors on the interfaces are superimposed and the vibration directions are the same. The resultant amplitude increases as the number of layers increases.

 

Aluminum foil insulation film, also known as the barrier film, an insulation film, insulation foil, hot film, reflective film. From aluminum foil veneer polyethylene film fiber is woven fabric metal coating by hot melt adhesive laminated, Dike aluminum foil insulation film with insulation, waterproof, moisture and other functions. Aluminum foil insulation of the sunshine absorption rate (solar radiation absorption coefficient) is very low (0.07), with excellent thermal insulation properties, can reflect more than 93% of radiant heat, is widely used in building roof and external wall insulation Insulation.

 

Except for the special laser light panel our company produced the ultra-thin light box.If you are interested contact us.

 


 

Close the window】【Print
Copyright ©2005 - 2013 COSUN Technology (Shenzhen) CO.,Ltd . 
Addr:No.2 workshop,No,7 Fuping Middle Road, Longgang District, Shenzhen, China
Tel: 86 0755 2835 1026 / (86) 13925201381 / (86)13410272315
Fax: 86 755 28351016-8002
邮编:330520
  • Your Name:
  • *
  • Company Name:
  • *
  • Address:
  • *
  • Telephone:
  • *
  • Fax:
  • *
  • E-mail:
  • *
  • Post Code:
  • *
  • Consulting Theme:
  • *
  • Description:
  • *
在线留言 FEEDBOOK
Our attention Our attention
  • Mobile phone website
  • The official micro-blog