News News
News News
In the light box we often hear the word backlight module, then the backlight module in the end what is it? The main components of the light source, light guide plate, backplane, reflective film, diffuser, booster, black and white plastic. As the backlight requirements are getting thinner, so some need to add the aluminum frame. General side of the light-type backlight module placed in the bottom of the light guide plate, the leakage from the bottom of the light reflected back to the light guide plate to prevent light leakage, in order to increase the efficiency of light use: and direct-type backlight module is placed The bottom surface of the light box is affixed to it, and the light beam reflected by the diffuser plate is reflected back from the bottom of the light box back to t...
Datetime: 2017 - 06 - 30
浏览次数:8
Regardless of bends, twists, or turns, LED light strips can be modified to fit any application. Soldering LED strip lights allow for extended length, multi-strip connection, and secure bonding. The following steps demonstrate how to split and solder a run of LEDs, but the same process can be used for joining two separate LED strips. 1.After you have determined where you want your LED strip light to be cut, use scissors or side cutters to cut cleanly across the strip. Make sure to cut only on printed points that have scissors graphic.2.You will now have two LED strip lights. Carefully...
发布时间: 2017 - 06 - 02
浏览次数:6
Each light box must be accompanied by a complete picture of the light box makes the box becomes complete, and a good creative with the painting to make the entire light box advertising to play the most vividly, and therefore with the painting is very important! Creative is more important! As the light box design process of particularity, the appearance of ultra-thin light box has been a limitation, in addition to crystal light box can shape other basic tend to square, and the type of light box is also limited, nothing more than crystal light box, aluminum light box, Magnetic light boxes, ...
发布时间: 2017 - 05 - 31
浏览次数:6
The snap frame light box is a flat energy-saving ultra-thin advertising light box. Four-sided flip opens easy to change the lights. Products from the panel, light guide plate light module, flip aluminum frame composed of three main pieces.Currently, on the market, there are two kinds of the snap frame light box is chamfer another is rounded. What is the difference between the two? Chamfer:Is to remove the parts on the machine due to the processing of the burr, but also to facilitate the assembly of parts, generally made in the part of the broken section of the chamfer, this process is als...
发布时间: 2017 - 05 - 27
浏览次数:11
As we all know, LED panel lights when in use, will inevitably be damaged or dead light of the situation, there are two major problems. First, power problems, the other is the light source. So how do we repair it? 1.Use a removable marker and mark out the side with the defective group of LEDs.Gently sit the panel light on the clean, dust free, cushioned work platform already set out. Front face down. 2.With your pair of tweezers placed at one corner of the panel, gently lift out the LGP, and at an appropriate height, you may lift it with your hands and rest it on a clean surface. ...
发布时间: 2017 - 05 - 26
浏览次数:12
Reflective film can be divided into two categories, one is the metal reflective film, one is the all-dielectric reflective film. In addition, there is a combination of the two metal dielectric reflective fil. General metal has a large extinction coefficient, when the light from the air into the metal surface, into the metal within the light amplitude of the rapid decay, making the metal into the internal light corresponding reduction, while the reflected light can increase. The greater the extinction coefficient, the more the attenuation of the light amplitude, the less the amount of ligh...
发布时间: 2017 - 05 - 24
浏览次数:8
Currently, on the market, common car insulation film from the principle is divided into heat-absorbing film and reflective film. The heat-absorbing film absorbs the infrared rays by the heat-absorbing adhesive applied to the surface of the transparent polyester film to achieve the purpose of heat insulation, and the reflective film is a layer of metal or nanometer ceramic material sputtered on the transparent polyester film to reflect the infrared To achieve the purpose of insulation. The difference between the heat absorbing film and the reflective film The heat-absorbing glue of th...
发布时间: 2017 - 05 - 23
浏览次数:12
Have you ever wondered what all those standards and certifications mean when it comes to lighting? We’ve put together a list that explains many of them! Have you ever wondered what all those standards and certifications mean when it comes to lighting? We’ve put together a list that explains many of them! CE: Meets European health, safety, and environmental standardsIn order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Euro...
发布时间: 2017 - 05 - 22
浏览次数:13
Often hear the customer said: "LED light box lighting can be further improved? Others home light bar brightness than you high, the price is cheaper than you." Today Xiaobian deliberately went to the workshop to do an experiment and found that customers provide 0.5W each lamp beads of light, the test time, less than half a minute light on the over. We all know led strip light  brightness depends on the brightness of LED lamp beads and the number of lamp beads, but the brightness of LED lamp beads by what decision? LED lamp beads brightness depends on the chip and the an...
发布时间: 2017 - 05 - 20
浏览次数:6
The growth of all things depends on the sun, the plant for the light requirements, mainly for the light color, spectrum, light intensity and light time. So by artificially developing a specific spectral lighting product can greatly improve plant light growth. LED plant lights can be widely used in plant cultivation, but the plant production cost of electricity accounted for about 30%, the development of resource-saving light source is the necessary demand for the construction of plant plants.Solar light is composed of many different wavelengths of light waves and in the solar radiation spectru...
发布时间: 2017 - 05 - 18
浏览次数:11
With the construction of outdoor lighting project, many cities have begun to use snap frame light box, the construction of this project, advertising light boxes to provide a new market. Advertising light boxes are widely used in electronics, food, finance, transportation and other industries.According to the installation of snap frame light boxes can be divided into wall-mounted and suspended type, how to install these two light boxes?It will be better that the light box is installed by the professional wireman. the step: first: decide the place and the method according to your practical ...
发布时间: 2017 - 05 - 17
浏览次数:4
Copyright ©2005 - 2013 COSUN Technology (Shenzhen) CO.,Ltd . 
Addr:No.2 workshop,No,7 Fuping Middle Road, Longgang District, Shenzhen, China
Tel: 86 0755 2835 1026 / (86) 13925201381 / (86)13410272315
Fax: 86 755 28351016-8002
邮编:330520
  • Your Name:
  • *
  • Company Name:
  • *
  • Address:
  • *
  • Telephone:
  • *
  • Fax:
  • *
  • E-mail:
  • *
  • Post Code:
  • *
  • Consulting Theme:
  • *
  • Description:
  • *
在线留言 FEEDBOOK
Our attention Our attention
  • Mobile phone website
  • The official micro-blog